Connect with us

Press Release

New Cutting-Edge Airborne Hyperspectral Data Confirms Target for Core of Porphyry Copper-Moly System at New Boston; Drill Program Mobilizes

Published

on

(via TheNewswire)

April 2, 2024, Vancouver, B.C. – TheNewswire – VR Resources Ltd. (TSX.V: VRR, FSE: 5VR; OTCQB: VRRCF), the “Company“, or “VR“, has received the final data from a state-of-the-art airborne hyperspectral survey covering its New Boston property and polymetallic Cu-Mo-Ag porphyry system in west-central Nevada, and the spring drill program has mobilized.

From VR’s President & CEO, Dr. Michael Gunning, “Historical, boots-on-the-ground exploration was completed by two renowned exploration groups at New Boston through the 1960s and 1970s. VR is building upon that work by utilizing modern and innovative exploration technologies to more specifically identify vectors for copper-bearing vein stockwork centers within the large footprint and polymetallic porphyry-skarn system overall.

We completed a triaxial airborne magnetic survey last spring, including high-resolution radiometrics, followed by a 3-D array, DCIP survey on the ground utilizing the leading, and proprietary technologies at DIAS Geophysical. All three surveys differentiate unique signatures at Jeep Mine and East Zone respectively, located on opposing sides of the central GW fault, itself mineralized at surface for more than a kilometre along strike.

Airborne hyperspectral surveys map alteration minerals. They augment property-scale mapping on the ground by providing detailed mineral identification, including compositional variation, which cannot be done visually. Further, the system is especially responsive at New Boston thanks to the excellent bedrock exposure in the Garfield Range, allowing for comparative analysis across the entire mineral system and surrounding district.

SpecTIR LLC, NV, is an industry leader in providing hyperspectral data from across the near-visible (VNIR), short (SWIR) and long (LWIR) infra-red wavelengths via their integrated FENIX 1K – OWL technology, and mapping the broadest range of alteration minerals, including the carbonates, clays, micas, quartz, iron, feldspars and garnet, among others. This is especially effective for skarn alteration minerals related to porphyry intrusions at New Boston.

For example, Figure 1: There is a strong correlation between high temperature clay minerals identified by the new hyperspectral survey with the potassic alteration in East Zone outlined by our high resolution airborne radiometric survey completed last year. Figure 2: Our first planned drill hole will be collared in quartz vein rubble with copper oxide within that high temperature clay alteration, and will target the conductor plunging westward toward the central GW fault as identified in the new 3D array DCIP data also obtained last year.

There are no historic drill holes into the East Zone conductor; you don’t drill what you can’t see. But 45 years later, an array of new geophysical and geochemical tools are showing VR a zonation in the New Boston porphyry system across the central GW boundary zone and fault: in potassic alteration; in vein intensity and geometry; in IP and conductivity anomalies; in magnetic patterns; in alteration mineral assemblages, and; in copper geochemistry.

The excavator in the photo taken last week in Figure 3 shows you that we are ready to go. Please stay tuned as we mobilize this maiden drill program into what we believe is the high temperature center for copper vein stockwork mineralization in the eastern cell of the large footprint and polymetallic copper-moly-silver system at New Boston.”

Field Videos

A short video from the recent field visit, along with video from several previous site visits are available on the New Boston Project Page on the Company’s website at www.vrr.ca. Also, on the Home Page itself, is a 20 minute video review of the New Boston project and drill targets, illustrated in PowerPoint. Shareholders are encouraged to follow the Company’s YouTube and Instagram channels for further field updates as drilling progresses.

Technical Information

Summary technical and geological information for the Company’s various exploration properties including New Boston is available at the Company’s website at www.vrr.ca.

Technical information for this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101. Justin Daley, P.Geo., VP Exploration and a non-independent Qualified Person oversees and/or participates in all aspects of the Company’s mineral exploration projects, and the content of this news release has been reviewed on behalf of the Company by the CEO, Dr. Michael Gunning, P.Geo., a non-independent Qualified Person.

About the New Boston Property

Location

New Boston is within the Walker Lane mineral belt and structural province in west-central Nevada. More specifically, it is within the co-spatial belts of Jurassic – and Cretaceous-aged copper and moly porphyry deposits, including the Yerington camp and Hall deposit.

New Boston is located in the Garfield Range in Mineral County, approximately 150 km southeast of Reno. Vegetation is sparse in the range; outcrop or colluvium predominate on the property itself, with quaternary cover developed off its eastern border and eastern flank of the range.

The property location facilitates cost-effective exploration, year-round. Access is from the nearby town of Luning, located just 5 km to the east on State Highway 95 connecting Reno and Las Vegas. The property itself is criss-crossed by a myriad of active, historic trails and roads, which are reachable from the highway.

Property Description

The New Boston property is large: it consists of 77 claims in one contiguous block approximately 3 x 5km in size and covering 583 hectares in total (1,441 acres). It covers the entire extent of the known copper-moly-silver porphyry-skarn mineral system exposed on surface between Blue Ribbon and East Zone, and its inferred down-dip potential to the north.

The property is on federal land administered by the Bureau of Land Management (BLM). There are no state or federal land use designations, or privately-owned land which impede access to the property; nor is the property within the BLM’s broadly defined area of sage grouse protection.

The property is owned 100% by VR. There are no underlying annual lease payments; nor are there any joint venture or back-in interests. The vendor of the property retains a royalty.

Stock Option Allocation

The Company has approved an aggregate allocation of 1,725,000 incentive stock options at a price of $0.22 and exercisable for a period of five years to various directors, officers, employees and consultants to the Company, and in accordance with the terms of the Company’s Stock Option Plan

About VR Resources

VR is an established junior exploration company based in Vancouver (TSX.V: VRR; Frankfurt: 5VR; OTCQB: VRRCF). VR evaluates, explores and advances large-scale, blue-sky opportunities in copper, gold and critical metals in Nevada, USA, and Ontario, Canada. The Company has also made Canada’s newest diamond discovery in northern Ontario, and controls a new field of kimberlite targets around it. VR applies modern exploration technologies and leverages in-house experience and expertise in greenfields exploration to large-footprint mineral systems in underexplored areas/districts. The foundation of VR is the proven track record of its Board in early-stage exploration, discovery and M&A. The Company is well-financed for its mineral exploration and corporate obligations. VR owns its properties outright and evaluates new opportunities on an ongoing basis, whether by staking or acquisition.

ON BEHALF OF THE BOARD OF DIRECTORS:

“Michael H. Gunning”

____________________________

Dr. Michael H. Gunning, PhD, PGeo

President & CEO

For general information please use the following:
Website:
www.vrr.ca
Email:
info@vrr.ca
Phone: 778-731-9292

Forward Looking Statements

This news release contains statements that constitute “forward-looking statements”. Such forward looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. Forward-looking statements in this document include statements concerning VR’s plans to drill its New Boston property, and all other statements that are not statements of historical fact.

Although the Company believes the forward-looking information contained in this news release is reasonable based on information available on the date hereof, by their nature forward-looking statements involve assumptions, known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements.

Examples of such assumptions, risks and uncertainties include, without limitation, assumptions, risks and uncertainties associated with general economic conditions; the Covid-19 pandemic; adverse industry events; future legislative and regulatory developments in the mining sector; the Companys ability to access sufficient capital from internal and external sources, and/or inability to access sufficient capital on favorable terms; mining industry and markets in Canada and generally; the ability of the Company to implement its business strategies; competition; and other assumptions, risks and uncertainties.

The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. While the company may elect to, it does not undertake to update this information at any particular time except as required in accordance with applicable laws.

This news release may also contain statements and/or information with respect to mineral properties and/or deposits which are adjacent to and/or potentially similar to the Company’s mineral properties, but which the Company has no interest in nor rights to explore. Readers are cautioned that mineral deposits on similar properties are not necessarily indicative of mineral deposits on the Company’s properties.

Trading in the securities of the Company should be considered highly speculative. All of the Company’s public disclosure filings may be accessed via www.sedarplus.ca and readers are urged to review them.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in Policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release

——


Click Image To View Full Size

Figure 1. Hyperspectral data for clay alteration minerals plotted on Skywatch satellite image. The high temperature clays associated with potassic alteration at East Zone, outlined by the large, pink K/Th radiometric anomaly, contrast with the cooler phengitic clays at Jeep Mine. The clay alteration pixels corelate strongly with exposed mineralized porphyry dikes in both zones. The clay-chlorite and quartz alteration in the overlying dark grey argillite to the north of East Zone correlates with grid-based ICP-MS soil geochemical anomalies in the same area and are together suggestive of a source, buried porphyry stock at depth below the argillite. Solid white lines are traces for conceptual drill holes planned for 2024.


Click Image To View Full Size

Figure 2. View east from the property last week, standing on the drill pad for NB24-001, the first hole in the pending drill program planned for this spring at New Boston, with State Highway 95 connecting Reno and Las Vegas in the valley bottom in the background. The blue-green copper oxide in quartz vein rubble in the foreground correlates with high temperature clay and garnet alteration minerals identified in the new, state-of-the-art airborne hyperspectral survey covering New Boston, and shown in Figure 1.


Click Image To View Full Size

Figure 3. View west into the East Zone bowl last week, over the drill pad for the first hole in the pending drill program planned for this spring at New Boston. The piece of quartz vein material with copper sulfide and copper oxide was turned up by the excavator throughout the drill pad area, and supports the DCIP conductor which is modelled at surface at this location, and plunges back into the bowl in the background of the photo.

Copyright (c) 2024 TheNewswire – All rights reserved.

comtex tracking

COMTEX_450220322/2895/2024-04-02T07:30:43

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Step into a World of Strength and Survival with ‘The Eyes From Above’

Published

on

Uncover The Secrets Of The Eyes From Above: Jabari Lamb Invites Readers On An Inspiring Journey Of Triumph, Survival, And Self-Discovery

Ride on a journey of power, survival, and the unbreakable human spirit in the new novel by Jabari Lamb titled “The Eyes From Above.” A Nationwide Release will thereafter tell the story of family, perseverance, and reclaiming one’s identity in a world fraught with danger and hostility.

Track the life of Connie, fighting his way through dangerous waters to uncover long-buried truths about his family’s past, as he evades sinister forces who are determined to stop him at every step. In Charleston, South Carolina, this is the story peeling historical trauma, mythical elements, and an African sense of roots into a bewitching tapestry of history, fantasy, and raw emotion.

There’s that richness of culture and heritage alive through the eyes of his Gullah Geechee perspective: all the trials and triumphs of the African diaspora. He spent time abroad in South Africa, exploring other pockets of the African continent; he weaves a very personal, detailed narrative of African traditions and powerful ancestral connections that should speak to readers from every part of this world.

For high drama or soul-stirring histories, be sure to read “The Eyes from Above” to question what truth is and what is in memory. This book is available in bookstores all over the country and in stores online.

About the Author

A bold, new voice in literature, Jabari Lamb blends history and mythology and his Gullah Geechee heritage in stories hard to forget. This impressive young writer’s novel, The Eyes From Above, explores African roots and displacement based on his journey learning about the Gullah Geechee people, the history of African-Americans, and his trip to South Africa. A voice unique unto his own, Jabari extends the invitation to the reader to consider the fluidity of memory and identity and, indeed, the truth. The Eyes From Above makes its wonderful debut into the literary world.

Media Contact:

Contact Person: Jabari Lamb

Email: Jabarilamb1847@gmail.com

Phone: 770-580-3190

Website: Jabarilamb.com

City: Atlanta

State: Georgia

Country: United States

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Yijin Hardware Delivers High-Quality Sheet Metal Fabrication Services Worldwide

Published

on

United States, 17th Oct 2024, Yijin Hardware, a key player in precision CNC machining, has announced the global expansion of its sheet metal fabrication services. This development is aimed at supporting industries worldwide with high-quality, custom-engineered metal components. By extending services to new markets, Yijin Hardware strengthens its position as a reliable manufacturing partner for sectors that require precise, durable parts, such as automotive, aerospace, and electronics.

Yijin Hardware Delivers High-Quality Sheet Metal Fabrication Services Worldwide

Yijin Hardware has a long history of providing precision-engineered components, and its expansion into international markets reflects the company’s response to rising demand for reliable sheet metal fabrication services. The new offerings will include laser cutting, metal bending, welding, and a variety of other fabrication processes, designed to accommodate a wide range of industrial applications.

“Precision and quality have always been at the heart of Yijin Hardware’s operations,” said Gavin Yi, CEO of Yijin Hardware. “The expansion of sheet metal fabrication services is a natural progression in the company’s growth, enabling access to more industries worldwide that require high-performance metal components for their operations.”

The sheet metal fabrication sector has seen increasing demand as industries move towards more complex and custom-engineered solutions. Yijin Hardware’s global expansion is positioned to meet these growing needs by offering scalable services that are capable of handling both small-scale production and larger manufacturing runs. The company’s advanced facilities are equipped with the latest machinery, ensuring that each part meets precise specifications and high-quality standards.

Yijin Hardware has also invested heavily in upgrading its production infrastructure to support the increased demand from international clients. Enhancements in laser cutting, welding, and assembly operations have been key factors in enabling the company to offer a more diverse set of services globally. The ability to handle custom and high-volume orders without compromising on quality is a cornerstone of Yijin Hardware’s service offerings.

Yijin Hardware Delivers High-Quality Sheet Metal Fabrication Services Worldwide

“Looking ahead, Yijin Hardware is committed to further advancing its manufacturing capabilities,” Gavin Yi added. “There are plans to introduce more cutting-edge technologies that will enhance both CNC machining and sheet metal fabrication services. These advancements will ensure the company remains well-positioned to address the evolving needs of industries in the future.”

Yijin Hardware’s expanded services will cater to industries with a need for complex, high-precision components, including automotive parts, aerospace structures, and electronic enclosures. With a focus on maintaining strict quality control throughout the production process, the company aims to provide solutions that meet exacting industry standards.

As part of its expansion strategy, Yijin Hardware continues to emphasize innovation and efficiency. These principles are expected to guide the company’s future developments as it explores new manufacturing technologies and methods. The expansion also supports the company’s vision of being a global leader in precision engineering.

For further information about sheet metal fabrication services, please contact Yijin Hardware at +1 626 263 5841 or via email at yijing@yijinsolution.com. 

Media Contact

Organization: Yijin Hardware

Contact
Person:
Gavin Yi

Website:

http://yijinsolution.com/

Email:

yijing@yijinsolution.com

Country:United States

The post Yijin Hardware Delivers High-Quality Sheet Metal Fabrication Services Worldwide appeared first on
Brand News 24.
It is provided by a third-party content
provider. Brand News 24 makes no
warranties or representations in connection with it.

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

Press Release

Yijin Hardware Offers Global CNC Machining Services from China

Published

on

United States, 17th Oct 2024, Yijin Hardware, a well-established provider of custom CNC machining services, has announced its expansion into global markets. The company, recognized for its precision manufacturing capabilities, aims to support international businesses in industries such as aerospace, automotive, electronics, and medical with tailored CNC solutions. This move comes as industries worldwide increasingly require high-quality, custom-manufactured components to meet modern production needs.

Yijin Hardware Offers Global CNC Machining Services from China

Yijin Hardware’s decision to extend its services beyond China reflects its commitment to addressing the needs of a broader range of industries. With years of experience in CNC machining, the company has developed a reputation for delivering reliable and precise parts to a diverse set of clients. The expansion will provide industries worldwide with access to Yijin Hardware’s capabilities, backed by advanced technology and stringent quality control.

Gavin Yi, CEO of Yijin Hardware, commented on the expansion: “This move into international markets represents a significant milestone. Yijin Hardware has always emphasized precision and reliability, and this expansion allows those same standards to be brought to clients around the world. Whether the project involves a small batch of components or a large production run, the company is prepared to meet the exacting standards required by global industries.”

Operating from its facilities in Shenzhen, Yijin Hardware manages the full lifecycle of production, from initial design to final inspection. This comprehensive approach ensures that each project is carefully monitored to meet specific client requirements. Yijin Hardware’s ability to offer customized machining solutions is seen as a key factor in its growth, particularly as companies increasingly seek specialized components for complex applications.

Previously focused primarily on the domestic market in China, Yijin Hardware’s expansion aims to deliver the same level of precision and service to international clients. By positioning itself as a global CNC machining provider, the company plans to strengthen relationships with existing partners while establishing new connections in other regions.

Yijin Hardware Offers Global CNC Machining Services from China

This global expansion comes at a time when demand for CNC machining services is rising due to the increasing complexity of product designs and the need for enhanced precision in manufacturing. As industries continue to evolve, CNC machining remains crucial to ensuring that parts meet exact specifications. Yijin Hardware has embraced this role through continuous investment in advanced equipment and machining techniques.

Looking ahead, Yijin Hardware is also focused on the future of manufacturing and its impact on sustainability. The company plans to explore new methods that reduce material waste and promote more efficient production processes. According to Gavin Yi, “As the company expands globally, attention is focused not only on immediate goals but also on contributing to long-term sustainable manufacturing. CNC machining plays a critical role in reducing waste and improving production efficiency. Yijin Hardware is committed to finding ways to make processes more environmentally friendly, to become a leader in both precision and sustainability.”

Yijin Hardware’s entry into global markets signals a broader shift in its strategy, focusing on serving a more diverse range of industries with its expertise in CNC machining. By offering international clients access to its advanced manufacturing solutions, the company aims to become a trusted partner for businesses looking to streamline production with high-quality, custom-manufactured parts.

For more information about Yijin Hardware’s global CNC machining China, inquiries can be directed via phone at +1 626 263 5841 or by email at yijing@yijinsolution.com.

Media Contact

Organization: Yijin Hardware

Contact
Person:
Gavin Yi

Website:

http://yijinsolution.com/

Email:

yijing@yijinsolution.com

Contact Number: 16262635841

Country:United States

The post Yijin Hardware Offers Global CNC Machining Services from China appeared first on
Brand News 24.
It is provided by a third-party content
provider. Brand News 24 makes no
warranties or representations in connection with it.

About Author

Disclaimer: The views, suggestions, and opinions expressed here are the sole responsibility of the experts. No Digi Observer journalist was involved in the writing and production of this article.

Continue Reading

LATEST POST